CẢM BIẾN QUANG ĐIỆN TAKEX PB-IN-50HF 100HF 200HF SERIES
CẢM BIẾN QUANG ĐIỆN TAKEX PB-IN-50HF 100HF 200HF SERIES
PHOTOELECTRIC BEAM SENSOR ( QUAD BEAM )
Công ty Ngân Anh Phát chúng tôi chuyên phân phối và cung cấp các dòng sản phẩm chính hãng cảm biến quang điện loại bốn chùm tia PB-IN-50HF 100HF 200HF Series từ nhà sản xuất Takex xuất xứ Japan
Các tính năng của dòng PB-IN-50HF 100HF 200HF series
+ 4 chùm tia công suất cao được đồng bộ
+ Lựa chọn 4 kênh chùm tia để ngăn chặn nhiễu xuyên âm
+ Tích hợp mạch điện kiểm soát môi trường
+ Khóa tính năng tự động
+ Điều biến kép cho khả năng miễn dịch ánh sáng vượt trội ( đèn pha ô tô, đèn huỳnh quang hoặc đèn thủy ngân )
+ Miễn nhiễm với ánh sáng mặt trời 50.000 lux
+ 4 chùm tia giúp ngăn chặn các báo động sai từ lá rơi và động vật nhỏ
+ Các hoạt động truyền tia hồng ngoại mạnh mẽ với một khoảng cách tối đa lớn hơn khoảng cách quy định bảo vệ mười lần.
Model:
PB-IN-50HF
PB-IN-100HF
PB-IN-200HF
Thông số kỹ thuật cảm biến quang loại 4 chùm tia:
Model | PB-IN-50HF | PB-IN-100HF | PB-IN-200HF |
Detection system | Simultaneous breaking of 4 beams | ||
Infrared beam | LED pulsed beam, Double modulation | ||
Protection distance | Outdoor 50m or less Indoor 100m or less | Outdoor 100m or less Indoor 200m or less | Outdoor 200m or less Indoor 400m or less |
Max. beam range (approx.) | 500m | 1000m | 2000m |
Response time | 50msec. to 700msec. (Variable at pot) | ||
Supply voltage | 12V to 30VDC (Non-polarity) | ||
Current consumption | 60mA or less | 70mA or less | 85mA or less |
Alarm output | Dry contact relay output 1c Contact action : Interruption time + delay time (1.5 sec.) Contact capacity : 30V (AC/DC) 1A or less | ||
Environmental output | Dry contact relay : 1a or 1b (selectable) Contact action : Output when environmental conditions worsen Contact capacity : 30V (AC/DC) 1A or less | ||
Tamper output | Dry contact relay 1b Contact action : Activated when TX/RX cover is detached Contact capacity : 30V AC/DC, 0.5A or less | ||
Alarm LED | Red LED (Receiver) ON : when an alarm is initiated | ||
Sensitivity attenuation LED | Red LED (Receiver) ON : when beam reception is attenuated | ||
Functions | Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack | ||
Ambient temperature range | - 35°C to +66°C | ||
Beam adjustment | Horizontal : ±90°, Vertical : ±10° | ||
Mounting positions | Indoor / Outdoor | ||
Wiring | Terminals | ||
Weight | Transmitter : 1200g / Receiver : 1300g | ||
Appearance | PC resin (wine red) |