.jpg?Watermark= "Click để xem hình đầy đủ")
LMKPCI4P (Indexer Card) HIWIN
SPECIFICATIONS
Applicable Motors:- Linear or rotary stepping motors.
- Linear or rotary servomotors with pulse input.
Performance:
- Number of controllable axes: 4
- Multiple cards may be used.
- Maximum pulse output frequency: 2.4 Mpps
- Position range: 0~268, 235, 455 pulses (28-bit up/down counter)
LMKPCI4P (Indexer Card) HIWIN
I/O Signals for Each Axis (All Optically Isolated):
- Command pulse output: OUT and DIR
- Incremental encoder signal input: EA and EB
- Encoder index signal input: EZ
- Mechanical input: PEL, MEL, PSD, MSD and ORG
- Servomotor interface I/O: INP, ALM and ERC
- General purpose digital output: SVON
- General purpose digital Input: RDY
- Pulser signal input: PA and PB
- Simultaneous start/stop signal I/O: STA and STP
SPECIFICATIONS
- Slot power supply(input): +5V DC±5%, 900mA max. from PCI bus in PC.
- External power supply(input): +24V DC±5%, 500mA max., user provided.
FEATURES
Hardware:
- Maximum output frequency of 2.4 Mpps.
- 2-axis circular and linear interpolation.
- 28-bit up/down counter for incremental encoder feedback.
- Home switch, index signal, positive and negative limit switches interface provided for all axes.
- Programmable PC interrupt conditions.
- Simultaneous start/stop motion in multiple axes.
- Manual pulser input interface.
- 100-pin interface.
Software:
- Motion Maker™, application development software for Microsoft Windows.
- DLL library and utility for DOS library and Windows 95/98/NT/2000.
.jpg?width=270&height=290&mode=pad)
